Colour Vision Deficiency, Explained

By Udit Agarwal · Updated October 17, 2026

Colour vision deficiency, usually called colour blindness, is a reduced ability to tell some colours apart, most often reds and greens, because one of the three kinds of cone cell in the eye works differently or is missing. According to MedlinePlus Genetics, from the US National Library of Medicine, the red-green form affects about 1 in 12 males and 1 in 200 females with Northern European ancestry. Most people with it still see colour; they miss some of the differences other people see.

How colour vision works

The retina has three kinds of cone cell, each most sensitive to a different part of the spectrum: short wavelengths (S cones, often called blue), medium (M, green) and long (L, red). The colour names are shorthand, since the M and L cones respond to heavily overlapping ranges. The brain works out colour by comparing how strongly the three kinds respond. If one kind responds differently or is missing, some colours that look different to most people send the same pattern of signals and look alike. Vision scientists say such colours lie on a confusion line, and colour vision tests are built from them.

Types of colour vision deficiency

Deficiencies are named after the cone type that is affected, protan for L, deutan for M and tritan for S, and graded by how strongly it is affected:

  • Anomalous trichromacy: all three cone types work, but one responds to a shifted range of wavelengths. These are the milder and more common forms, with names ending in -anomaly.
  • Dichromacy: one cone type does not work at all, leaving two. These forms end in -anopia.
  • Monochromacy: no more than one cone type works. It is rare and can also affect sharpness and sensitivity to light.
Type Cone affected Milder form Stronger form Colours that tend to look alike
Protan L (red) Protanomaly Protanopia Reds and greens; reds also look duller
Deutan M (green) Deuteranomaly Deuteranopia Reds and greens
Tritan S (blue) Tritanomaly Tritanopia Blue and green, yellow and red or pink

The US National Eye Institute (NEI) describes deuteranomaly, the most common type, as making certain greens look more red, and protanomaly as making some reds look more green and less bright; with protanopia or deuteranopia, red and green cannot be told apart at all. In rod monochromacy, also called achromatopsia, no colour is seen, and in blue cone monochromacy only the S cones work.

How common is colour blindness?

Red-green deficiency is by far the most common kind, and MedlinePlus notes lower rates than the Northern European figures in almost all other populations studied. Commonly quoted estimates split the roughly 8 percent of Northern European men into about 5 percent of all men with deuteranomaly and about 1 percent each with protanomaly, protanopia and deuteranopia.

Tritan deficiency affects fewer than 1 in 10,000 people worldwide, men and women equally. Blue cone monochromacy affects about 1 in 100,000.

The difference between the sexes is genetic. The genes for the L and M cone pigments, OPN1LW and OPN1MW, are on the X chromosome, and red-green deficiency is inherited in an X-linked recessive pattern. A man has one X chromosome, so one altered copy is enough; a woman has two and usually needs both to be altered. Tritan defects come from a different gene, OPN1SW, and are inherited in an autosomal dominant pattern, which is why they are equally common in both sexes.

Colour vision can also change during life: eye diseases, some medicines and a clouding lens can all affect it, so a new change is a reason to have your eyes examined.

How Ishihara plates work

The best-known screening test was published in 1917 by Shinobu Ishihara, a Japanese ophthalmologist. Each Ishihara plate is a circle of coloured dots of varied sizes and shades, some of which form a number. On most plates, the colours of the number and the background are picked so that someone with a red-green deficiency sees them as alike, while the varied dot sizes and shades stop the outline from showing through in any other way.

The full edition has 38 plates, and shorter editions are common. The plates come in several designs:

  • Demonstration plates that everyone can read, to show how the test works.
  • Transformation plates, on which people with typical colour vision see one number and people with a red-green deficiency see a different one.
  • Vanishing plates, on which the number is visible only with typical colour vision.
  • Hidden-digit plates, on which only people with a deficiency see a number.
  • Diagnostic plates, which help tell protan from deutan deficiency.

The Ishihara plates were designed to screen for red-green deficiency and do not test for tritan defects. Eye-care professionals add other tests when needed, such as plate sets with blue-yellow plates, cap-arrangement tests and the anomaloscope, the reference instrument for red-green deficiency, which can tell protan from deutan and anomalous trichromacy from dichromacy.

Why an online test can only screen

Printed plates use carefully controlled inks and are meant to be viewed in good daylight or under a lamp that imitates it. On a screen, the test maker controls none of that:

  • Displays differ in colour range, calibration and brightness, so the same image shows slightly different colours on different devices.
  • Night modes, blue-light filters, automatic white balance such as True Tone, and accessibility colour filters shift every colour on the screen.
  • Room lighting, glare, viewing angle, tinted glasses and tinted screen protectors change what reaches the eye.
  • Nobody supervises the test, so guesses, tiredness and mistyped numbers look like wrong answers.

An online result can therefore be wrong in either direction: a mild deficiency can pass, and a person with typical colour vision on a tinted screen can miss plates. A result that suggests a deficiency is a reason to book a colour vision test with an optometrist or ophthalmologist, who can confirm it, name the type and judge how strong it is.

What the ArrayKit Color Blind Test checks

The Color Blind Test is a 12-plate screening for red-green deficiency in the style of Ishihara plates. The plates are generated in your browser, not copied from the originals. Each one has about 1,500 non-overlapping dots of random sizes, and the number's tilt and position shift slightly from plate to plate. Dot positions never depend on the number, and every dot is made randomly lighter or darker by up to about a quarter, so neither size nor brightness gives the number away; only hue does. The two colour sets on a test plate lie along one line, chosen as a compromise between the protan and deutan confusion lines.

The plates always come in the same order:

Plate Kind Typical colour vision Typical red-green deficiency
1 Demonstration (blue on orange) Reads the number Reads the number
2 to 8 Transformation Reads the number Sees nothing, or on three plates only one digit
9 to 11 Fainter number ("Hidden number" in the results) Reads the number Sees nothing
12 Control (violet on khaki) Reads the number Reads the number

There are three sets of numbers, and a retake uses new dots and a different set. You type the digits you see, up to three, or press "I can't see a number", and there is no Back button. The result follows fixed rules:

  • If plate 1 is not read, the result is inconclusive, because a red-green deficiency does not hide that plate; a dim or filtered screen is the likelier cause.
  • Reading 10 or more of the 12 plates the way most people do gives "No sign of red-green colour vision deficiency". Two slips are allowed because three plates are deliberately faint.
  • Reading 6 or fewer, with at least half of the missed test plates answered "nothing" or with the one digit a red-green deficient viewer still sees, gives "Possible red-green colour vision deficiency". It is labelled strong, moderate or mild by how many of the 10 test plates were still read the usual way: 0 to 1, 2 to 3, or 4 or more.
  • Anything else, such as 7 to 9 plates read or several unexpected numbers, is inconclusive.

For example, someone who reads plate 1, sees nothing on plates 2, 4, 6 and 8 to 11, sees only one digit on plates 3, 5 and 7, and reads the control scores 2 of 12: a possible deficiency, labelled strong. The result page also lists your answers beside what most people see and what is often seen with a red-green deficiency, offers a one-line result to copy, and links to the Color Blindness Simulator. The plates are drawn and scored in your browser, and nothing you type is sent anywhere.

The page states its limits too. It does not test for tritan deficiency, it cannot tell protan from deutan, and the mild, moderate and strong labels describe your answers, not a measured severity. It needs a browser that can draw on a canvas and cannot be completed with a screen reader. Before starting, switch off night mode and colour filters and wear your usual glasses.

Living and designing with colour blindness

Inherited colour vision deficiency has no cure, and many people only find out they have it when they take a test. Tinted glasses sold for colour blindness can make some colours stand out more for some wearers, but they do not restore typical colour vision. Reading labels, noting which position is lit on a traffic signal and asking for colour names all help.

For anyone who makes charts, maps, interfaces or slides, the main rule is never to use colour as the only way to carry information. The Web Content Accessibility Guidelines (WCAG) make this success criterion 1.4.1, Use of Color. Add labels, patterns or icons, and check contrast. The Color Blindness Simulator shows an image as it might look with protanopia, deuteranopia, tritanopia or achromatopsia, the Contrast Checker tests text and background colours against WCAG, and the Color Palette Generator builds palettes and checks their contrast.

Frequently asked questions

What is the most common type of colour blindness? Deuteranomaly, the milder form of deutan (green-cone) deficiency, which makes some greens look redder. Commonly quoted estimates put it at about 5 percent of men of Northern European descent, more than all the other types combined.

Why are men more often colour blind than women? The genes for the red and green cone pigments are on the X chromosome. Men have one X, so a single altered copy causes red-green deficiency, while women usually need two. That is why it affects about 1 in 12 men but 1 in 200 women of Northern European ancestry.

Can an online color blind test diagnose colour blindness? No. It can only screen, because screens, settings and lighting vary and nobody supervises the test. A result that suggests a deficiency is a reason to see an optometrist or ophthalmologist, who uses calibrated tests under controlled light.

Does colour blindness get worse over time? Inherited red-green deficiency generally stays the same throughout life. A change in colour vision is more likely to have another cause, such as an eye condition or a medicine, and is worth having checked by an eye doctor.

What does the ArrayKit Color Blind Test check? It screens for red-green deficiency with 12 generated plates in the style of Ishihara plates and gives one of three outcomes: no sign, possible (mild, moderate or strong) or inconclusive. It does not test blue-yellow vision and cannot tell protan from deutan.

Keep going

Test de daltonisme

More guides

  • Reaction Time, Explained — What reaction time is, the typical simple visual reaction time for adults, why screens and mice add delay, what slows you down, and how to get a fair score.
  • Internet Speed Test Results, Explained — What download speed, upload speed, ping, jitter and bufferbloat mean, how much speed streaming, calls and gaming need, and why you get less than your plan.
  • Typing Speed and WPM, Explained — How WPM is calculated, how net and raw speed differ, what counts as a good typing score, and how to type faster with fewer mistakes. Test your speed online.
  • Base64 Encoding, Explained — Base64 explained: how it turns binary into text, the alphabet and padding, the URL-safe variant, size overhead, use cases, and why it isn't encryption.
  • Linux File Permissions and chmod, Explained — What chmod 755, 644 and 777 mean: owner, group and others, read, write and execute, octal and symbolic modes, umask, setuid, setgid and the sticky bit.
  • DMS and Decimal Degrees, Explained — How to convert DMS to decimal degrees and back, how DD, DMS and DDM differ, how many decimal places you need, and which formats Google Maps and GPS accept.

All Online Tests tools · All guides